TEL:86 0755 29755799

Home > News > Lndustry Lnformation >

联系我们

电话:86 0755 29755799

邮箱:weichuanghui01@126.com

地址:Building 11, District B, Liantang Industrial City, Shangcun Community, Gongming Street, Guangming District, Shenzhen

What should be paid attention to when operating a fully auto

作者:伟创辉发布日期:2021-05-06浏览人数:

The automatic screw machine, which can be regarded as the necessary equipment for the production of industrial enterprises, has been widely used in today's society, and the handling precautions of the automatic screw machine have also become a concern of many industrial enterprises who purchase this equipment. . So what should be paid attention to during the operation of a wide range of fully automatic screw machines?
Note 1: Ensure that there is no mixing in the track
It is well known that the fully automatic screw machine cannot do without the support of important components while making contributions to the production automation of modern industrial enterprises. Among them, the track is an important part of the fully automatic screw machine. Once the equipment's track is mixed with some irrelevant materials, it may affect its work efficiency. Therefore, when operating the fully automatic screw machine, be careful not to let the mixed materials enter the track.
Note 2: Avoid the screws from jumping out of the chassis
At present, the existing fully automatic screw machines on the market will more or less vibrate during operation. Once the vibration amplitude is too large, the screws inside the equipment chassis may jump out of the chassis. Therefore, it is necessary to prevent the screws from jumping out of the chassis when operating the fully automatic screw machine. The operator can even add some protective devices to the chassis of the equipment if necessary.
Note 3: Parts with severe wear should be replaced in time
Since the fully automatic screw machine needs to frequently come into contact with hard objects such as screws when screwing, the screw tubes and screwdriver heads of the equipment are extremely susceptible to wear after long-term operation. If the relevant operators find that these parts are seriously worn, they should replace them in time, so as not to change the severely worn parts in time and affect the rate of screwing.
The above content is an introduction to the handling precautions of the fully automatic screw machine. The high-quality fully automatic screw machine has indeed made a significant contribution to improving the production efficiency of many industrial enterprises. Therefore, every industrial enterprise that purchases a fully automatic screw machine must pay attention to the above matters when operating this mechanical equipment. .